ST JAMES SOFTWOOD DRIVEWAY + PEDESTRIAN GATE DESIGN
St James softwood driveway gates with matching pedestrian gate. The gates were manufactured with a 70mm frame made from Scandinavian softwood and pre-treated before installation. The gate automation system installed to the driveway gates is The S.E.A 24volt Flipper Gate automation kit along with wireless battery operated photo cells with solar panel to recharge the batteries within the photo cells. The intercom system installed to operate the driveway gates is the Daitem wireless intercom system without key pad.
ST JAMES SOFTWOOD DRIVEWAY GATES
St James softwood driveway gates hinged on hardwood oak gate posts. The driveway gates were manufactured with a 70mm frame made from Scandinavian softwood. The gate posts installed are manufactured from oak hardwood which reduces the movement within the posts. The driveway gates were pre-treated and stained to the customers requirements prior to installation The gate automation system installed to the driveway gates is the S.E.A Mini hydraulic gate automation kit with wired photo cells along with the Daitem wireless intercom system with key pad.
Primrose Hardwood Sliding Driveway Gate Design
The primrose hardwood gate design. This installation is operated as a sliding gate on a floor mounted track. The gate itself is made from Sapele Hardwood and manufactured in one length with a 70mm frame. The gate automation fitted is the Saturn 600 gate kit along with additional photo cells and safety edges. We also installed a pedestrian gate to the front of the house with a self closing gas strut, mag lock, code pad for exit and the Daitem wireless intercom system. The brick piers with the lights built in were erected by us. The lights operate when both gates are open or they can be over ridden by the on and off switch to allow the lights to stay on permanently. The intercom handset also allowed the customer to open the driveway gate as well as the pedestrian gate although the intercom system was installed at the pedestrian gate. The fencing was supplied and installed by ourselves and stained after completing the project. We also fitted a flex receiver to the garage motors so the customer had one remote to open the gates and garage door.
The Hyde Swan Neck Softwood Gates
The Hyde Swan Neck Gates are manufactured from Scandinavian softwood with a 70mm frame. The gate automation fitted to the gates is the Surf 350 gate kit along with the Daitem intercom system, code pad for exit and a GSM call only system to open the gates as well as the remote controls (fobs).
Five Bar Country Diamond Gate and Gate Automation
The 5 bar country Diamond gate is made from Scandinavian Softwood with a 70mm frame. The gate automation fitted is the Surf 350 gate kit with physical stops and limit switches fitted as standard to the under carriage of the motor. The intercom system is a wired Videx intercom with code pad along with additional photo cells, safety edges and mag lock.