Wooden Gate Designs



Driveway Gates, Hyde Swan Neck Gate Design
Hyde Swan Neck Entrance Gates

Hyde double leaf swan neck gate design, option of 45mm or 70mm gate frames, standard sizes from 1800mm to 3600mm wide (divide by two for each gate leaf size) available in Scandinavian Softwood or Sapele Hardwood.

These gates can be made to measure. 

The Hyde Wooden driveway gates are one of our most popular wooden driveway gates, with its Swan neck top beam and very strong construction thanks to the mortise and tenon joints which are polyurethane glued and nailed.  With many rounded edges for water dispersal on the top, it’s a gate that’s both built to look good and to last.  

Please note all of our clad gates have stainless steel nails visible on the face of the gate.

If you are looking to have these gates automated we would advise that you order the heavy duty 70mm version for added strength.

Driveway Gates, St James Swan Neck Gate Design
St James Swan Neck Gate Design

St James double leaf swan neck gate design, 70mm gate frame, standard sizes from 1800mm to 3600mm wide (divide by two for each gate leaf size) available in Scandinavian Softwood or Sapele Hardwood.

These gates can be made to measure.

Our St James wooden gates are extremely popular. They are both elegant and practical and suit virtually any entrance or driveway. The curved beam is the same as our flagship Hyde Driveway Gates and rises 240mm (9.5”) from the hinge end to the centre. The gate ‘ears’ are also the same half rounded feature as the Hyde Driveway Gates, which compliments the curve. The slats are 20 x 70mm and are spaced to an aesthetically pleasing result. Overall it’s an excellent gate with plenty to offer its owners in terms of looks and functionality. These gates are available as hardwood gates of softwood gates.

Please note all of our clad gates have stainless steel nails visible on the face of the gate.

If you are looking to have these gates automated we would advise that you order the heavy duty 70mm version for added strength.

 

Driveway Gates, Regent Swan Neck Gate Design
Regent Swan Neck Gates

Regent double leaf swan neck gate design, 70mm gate frame, standard sizes from 1800mm to 3600mm wide (divide by two for each gate leaf size) available in Scandinavian Softwood or Sapele Hardwood.

These gates can be made to measure. 

The Regent wooden driveway gates offer a combination of looks, strength, a degree of privacy- with the ornate spikes. Once again we have the beautiful curved beam as found on our flagship Hyde wooden gates. The bars are 16mm steel which are Galvanised and then powder coated black. The arrowheads on top follow the curve to create a visually and technically impressive final product. The ‘ears’ are made taller so as to meet the top of the arrowheads at both the hinge end and centre of the wooden gates.

Please note all of our clad gates have stainless steel nails visible on the face of the gate.

If you are looking to have these gates automated we would advise that you order the heavy duty 70mm version for added strength.

 

Driveway Gates, Victoria Swan Neck Gate Design
Victoria

Victoria double leaf swan neck gate design, 70mm gate frame, standard sizes from 1800mm to 3600mm wide (divide by two for each gate leaf size) available in Scandinavian Softwood or Sapele Hardwood.

These gates can be made to measure. 

The Victoria wooden driveway gates offer a combination of looks, strength, a degree of privacy- with the ornate spikes. Once again we have the beautiful curved beam as found on our flagship Hyde wooden gates. The bars are 16mm steel which are Galvanised and then powder coated black and follow the curve to create a visually and technically impressive final product. The ‘ears’ are made taller so as to meet the top of the arrowheads at both the hinge end and centre of the wooden gates.

Please note all of our clad gates have stainless steel nails visible on the face of the gate.

Please note all If you are looking to have these gates automated we would advise that you order the heavy duty 70mm version for added strength.

 

Driveway Gates, Primrose Gate Design
Primrose Gate Design

Primrose double leaf gate design, option of 45mm or 70mm gate frames, standard sizes from 2100mm to 4000mm wide (divide by two for each gate leaf size) available in Scandinavian Softwood or Sapele Hardwood.

These gates can be made to measure.

The Primrose wooden driveway gates are a highly popular choice for those looking for security and privacy and don’t want to spend a fortune. The tongue and groove boards are recessed into the frame which means you get to see the frame on the front of these wooden gates. Mortise and tenon joints secured by nails and polyurethane glue for maximum strength.

Please note all of our clad gates have stainless steel nails visible on the face of the gate.

Please note all If you are looking to have these gates automated we would advise that you order the heavy duty 70mm version for added strength.

Driveway Gates, Brompton Gate Design
Brompton gate design

Brompton double leaf gate design, 50mm gate frame with standard sizes from 1800mm to 3600mm wide (divide by two for each gate leaf size) available in Scandinavian Softwood or Sapele Hardwood. These gates can be made to measure. 

The Brompton wooden gates are an example of really strong driveway gates. It has the same strong frame as all our 70mm wooden gates but is made unique by its 50 x 50mm stud slats and curved gun-stock top. The beauty of this design is we can easily customise the overall height and even the proportions of the studs to boards to get the look you want for your driveway. 

Please note all of our clad gates have stainless steel nails visible on the face of the gate.

These are suitable for over ground automation and can be adapted to suit underground systems as well.

Driveway Gates, Kensington Gate Design
Kensington Gate Design

Kensington double leaf gate design, 70mm gate frame standard sizes from 1800mm to 3600mm wide (divde by two for each gate leaf size) available in Scandinavian Softwood or Sapele Hardwood.

These gates can be made to measure.

The Kensington wooden driveway gates are a firm favourite with our customers. It’s a very solid design using thick timbers for the framework and the black steel bars add to it’s impressiveness. The Kensington wooden driveway gates offer a degree of privacy for the first two thirds and also discourages unlawful climbing over with it’s arrowhead top. The ‘ears’ feature the Four Way Weathered top to encourage water to run off. The tongue & groove boards are recessed into the frame for the best possible appearance. Behind the boards are two horizontal and two diagonal 45x95mm braces. All round it’s a great gate.

If you like this style but would like a nice curve to the top beam then take a look at our Regent Gate Design.

Please note all of our clad gates have stainless steel nails visible on the face of the gate.

Please note all If you are looking to have these gates automated we would advise that you order the heavy duty 70mm version for added strength.

5 Bar Marlow Gate Design

The Marlow is an old classic mixed with a little more security to stop those smaller animals breaking free!! Or if you just want something a little different.

Available in softwood or hardwood.

Max width 3900mm

Max height 1475mm

These gates can be made to measure.

These gates are suitable for above ground gate automation.

5 Bar Henley Gate Design

The Henley gate is great design option. The simplicity of it suits any driveway or garden setting. We manufacture this gate in Sapele hardwood and Scandinavian softwood.

Available in softwood or hardwood.

Max Width: 3900mm

Max Height: 1475mm

These gates can be made to measure.

These gates are suitable for above ground gate automation.

5 Bar Willow Braced Gate Design

The Willow Diamond Braced gate is specifically designed with the Agricultural world in mind.This gate is perfect for Garden, Field, Farm and Equestrian environments. The planed all round, kiln dried Scandinavian timber is of course very high quality and hand sorted by our carpenters.

Available in softwood or hardwood.

Max width 3900mm

Max height 1475mm

These gates can be made to measure.

These gates are suitable for above ground gate automation.

5 Bar Country Estate Gate Design

Our 5 Bar Country Estate Gates are renowned for their strength, quality of build and simple elegance. Featuring a tapered top beam, fully router chamfered edges and sourced only from our top graded timber. An excellent choice.

Available in softwood or hardwood.

Max width 3900mm

Max height 1475mm

These gates can be made to measure.

These gates are suitable for above ground gate automation.

5 Bar Windsor Gate Design

A classic beautifully designed wooden gate, the Windsor transforms any driveway into an elegant setting.

Avaliable in softwood or hardwood.

Max Width: 3900mm, Max Height: 1500mm. These gates can be made to measure.

PLEASE NOTE Our standard height for hook gates are as follows:

1520mm wide = 1400mm high (these gates do not have the diagonal pass through the hook)

1521mm wide = 1500mm high (these gates do have the diagonal pass through the hook)

These gates are suitable for above ground gate automation.

 

7 Bar Country Diamond Braced Gate Design

The Country Diamond Braced gate is specifically designed with the Agricultural world in mind. This gate is perfect for Garden, Field, Farm and Equestrian environments.The planed all round, kiln dried Scandinavian timber is of course very high quality and hand sorted by our carpenters.

Available in softwood or hardwood.

Max Width: 3900mm

Max Height: 1830mm

These gates can be made to measure.

These gates are suitable for above ground gate automation.

Garden Gate, The Hyde Gate Design

Available in softwood or hardwood.

Max Width: 1200mm, Max Height: 1150mm

The Hyde is by far our most popular garden gate to date. It’s a strong garden gate design with two horizontal ledges on the rear as well as the top beam. As with most of our garden gates, the tongue & groove boards are recessed into the frame for the best look possible. The joints are mortise and tenon for strength and durability. The curved ‘ears’ finish off the design rather nicely. We offer this gate in Hardwood and Softwood. The Hyde garden gate will give your property a warm elegant look as well as keeping your pets and children safe.

Please note nail heads are visible on the front of the gate

Garden Gate, The Brompton Gate Design

Available in softwood or hardwood.

Max Width: 1200mm

Max Height: 1150mm

Garden Gate, The Primrose Gate Design

Available in softwood or hardwood.

Max Width: 1200mm

Max Height: 1150mm

Garden Gate, The St James Gate Design

The St James Garden Slatted Gate can come with either a curved upwards top beam or a curved down top beam (Please state your preference when placing an order)

Compliment any house from modern sleek to old country cottage with its hand crafted curves and vertical slats it really is a stunning design. We offer this wooden garden gate in hardwood and softwood timber.

Available in softwood or hardwood.

Max Width: 1200mm

Max Height: 1150mm

Garden Gate, The Cottage Gate Design

The Cottage gate design is more like a work of art than a gate!!.

Each top beam is hand cut out , sanded and finished so no two gates are the same.

As with most of our garden gates, the tongue & groove boards are recessed into the frame for the best look possible. The joints are mortise and tenon for strength and durability. The curved ‘ears’ finish off the design rather nicely. We offer this gate in Hardwood and Softwood.

The Cottage gate design can come with the additional spike head or it can be left out if preferred.

Please note nail heads are visible on the front of the gate.

Available in softwood or hardwood.

Max Width: 1200mm

Max Height: 1150mm

Garden Gate, The Picket Gate Design

The Picket Gate is the perfect choice for a small garden gate at a very affordable price. Available with pointed or rounded tops (please state you preference). This gate comes pressure treated as standard in brown. A lovely little wooden gate to keep the children or pets In the garden!!

Available in softwood or hardwood.

Max Width: 1200mm

Max Height: 1200mm

Side Gate, The Hyde Gate Design

The Hyde is by far our most popular side gate to date. We can see why. It offers the privacy of a solid gate with a curved top that is really pleasing to the eye and suits most side entrances. It’s a strong gate design with three horizontal ledges on the rear as well as the top beam.

As with most of our gates, the tongue & groove boards are recessed into the frame for the best look possible. The joints are mortise and tenon for strength and durability. The curved ‘ears’ finish off the design rather nicely.

Available in softwood or hardwood.

Frame thickness  45mm or 70mm

Max Width: 1400mm

Max Height: 2000mm

Side Gate, The Cottage Gate Design

The Cottage Garden Gate is the invention of one of the more Quirky partners of the company!!

The beams of this wooden gate are hand crafted for each order giving the customer a more custom and artistic looking design. As with most of our gates, the tongue & groove boards are recessed into the frame for the best look possible and to protect the end grain. The joints are mortise and tenon for strength and durability. The legs are finished off with a beautiful pewter design.

Available in softwood or hardwood.

Frame thickness  45mm or 70mm

Max Width: 1500mm

Max Height: 2000mm

Side Gate, The Primrose Gate Design

The Name of the Classic says it all, this is one of the most tradidional styles gates we use in this country. We use the same traditional mortise and tenon joints that have been used for hundreds of years giving all of our gates strength and durability. The tongue & groove boards are recessed into the frame for the best look possible and to protect the end grain.

Available in softwood or hardwood.

Frame thickness  45mm or 70mm

Max Width: 1400mm

Max Height: 2000mm

Side Gate, The St James Gate Design

The Slatted St James Gate offers a little more character with its vertical slats. The hand cut and shaped curve top is pleasing to the eye. This gate is by far one of our most popular garden gates or side entrance gates. As with most of our gates, the tongue & groove boards are recessed into the frame for the best look possible. The joints are mortise and tenon for strength and durability and we only use stainless steel nails.

Available in softwood or hardwood.

Frame thickness  45mm or 70mm

Max Width: 1400mm

Max Height: 2000mm

Side Gate, The Kensington Gate Design

The Kensington is a strong gate with it’s 70x95mm frame. It features two full beams that house the 16mm solid steel bars with decorative arrowhead tops. The bars are powder coated five times for durability and are very strong. This joints on the Heritage are mortise and tenon and are secured by hardwood dowels. It’s a gate that never fails to impress. It offers some privacy without blocking everything from view and has grown in popularity recently.

Available in softwood or hardwood.

Frame thickness  70mm x 95mm only

Max Width: 1400mm

Max Height: 2000mm

Side Gate, The Brompton Gate Design

The Slatted Brompton Gate Brings a level of privacy to your property but still allows visibility, perfect for animal owners that want to be able to see through the gate but still have the security of keeping pets in. As with most of our gates, the tongue & groove boards are recessed into the frame for the best look possible and to protect the end grain. The joints are mortise and tenon for strength and durability.

Available in softwood or hardwood.

Frame thickness  45mm or 70mm

Max Width: 1400mm

Max Height: 2000mm

Side Gate, The Secret Garden Gate Design

Available in softwood or hardwood.

Frame thickness  45mm or 70 mm

Max Width: 1400mm

Max Height: 2000mm

 

 

Side Gate, The Regent Gate Design

The Regent Gate offers a little more character with Solid Galvanised and then black finished metal bars. The hand cut and shaped curve top is pleasing to the eye. As with most of our gates, the tongue & groove boards are recessed into the frame for the best look possible. The joints are mortise and tenon for strength and durability and we only use stainless steel nails. 

Available in softwood or hardwood.

Frame thickness  45mm or 70mm

Max Width: 1400mm

Max Height: 2000mm

Side Gate, The Classic Arch Gate Design

The Classic Arch Gate is the ideal choice of side gate if you want a cost effective gate
as it does not have a mortised and tenon frame. This also means you can
achieve a tight radius curve. The curve can be cut to a custom radius to suit
a brick arch if needed.

Available in softwood or hardwood.

Frame thickness  N/A

Max Width: 1500mm

Max Height: 2000mm

Side Gate, The Traditional Picket Arch Gate Design

The Traditional Picket Arch Gate is the ideal choice of side gate if you want a cost effective gate as it does not have a mortised and tenon frame. This also means you can achieve a tight radius curve. The curve can be cut to a custom radius to suit a brick arch if needed.

Available in softwood or hardwood.

Frame thickness  N/A

Max Width: 1400mm

Max Height: 2000mm

Wooden Gate Lock
Marine Grade 316 Stainless Steel Gate Locks

These excellent locks are operated by key from both front and rear. One rotation of the key moves the bar all the way across and locks it into place. These gate locks are solidly built and the bar is made from stainless steel.
2 Keys Included / Easy to Install. The size in mm refers to the length of the barrel of the lock. The 50mm version is suitable for gates upto 50mm thick, the 70mm version is suitable for gates upto 70mm thick.
 

Wooden Gate Lock.

Front View of Gate Lock

These Gate Lock Can Be fitted to all Driveway Gates, Garden Gates and Side Gates.

eXTReMe Tracker

Search Engine Spider Simulator

Enter URL to Spider