Sliding Operators


Saturn Sliding Gate Motor
Saturn Sliding Gate Motor

The ideal motor for domestic automatic sliding gates, this gate motor can handle gates up to 600 kg and is designed to open a 6m gate up to 25 times per hour.

Our double safety system means that SEA electric gates are extremely safe, stopping and reversing when they encounter any obstruction. Most dometic sliding gate operators only use one form of obstruction detection; SEA consider the safety of residential electric gates to be paramount so raise the quality to commercial standards.

The Saturn can be controlled by any combination of hand held radio transmitters, key-switches, push buttons or intercoms etc. It also has inputs for hold open time-clocks, photocells, stop buttons and safety edge devices. A choice of operating logics can be selected on the integral control unit.

In case of a power cut, an easy to use key release mechanism allows the electric gate to be put into manual operation until the power is restored.

Although a domestic form of gate automation the gearbox of the motor is oil filled for maximum lubrication, unlike the majority of light residential sliding gate systems available..

Lepus 600 Sliding Gate Motor

The Lepus 600 is a heavy duty motor that is designed for industrial operation and capable of opening and closing a 600 kg, 11 m gate up to 75% intensive usage.

This operator has an in-built in Gate 1 control panel capable of accepting all combinations of opening and safety signals, providing convenience and high security as required.

The gate operator has a secure, key lockable manual release mechanism internally. Where the sliding electric gate is the only access to the site, we can also provide an external release system.

A slip clutch, force regulating safety system is fitted between motor and the gear box, allowing for precise regulation of the motor forces. A rotation sensor is then fitted to measure the gate movement, stopping the gate immediately on sensing a slow down in motor speed.

A fully adjustable base plate, in-built control panel and solid aluminium gear box housing provide this operator with the flexibility and strength needed for large industrial automatic gates.

Lepus 1600 Sliding Gate motor

Lepus 1600

The largest of the single phase Lepus sliding gate operators is designed for heavy industrial operation capable of opening and closing an 1600 kg, 11m gate up to 30 times per hour.

The motor has all the features of the Lepus 600, with increased motor strength and higher resistance settings for the slip clutch mechanism. This electric gate motor uses an inductive limit switch for non contact detection of end of travel, providing increased reliability for your automatic gate system.

The electric motor and slip clutch mechanism are housed within an oil filled gear box providing continual lubrication and cooling. The slip clutch allows fine adjustment to the applied forces so that your automastic gate will stop easily when meeting an obstruction. The gate motor also has a rotation sensor, so that as soon as the gate is obstructred the motor will stop and reverse; providing an extremely high level of safety. For more information see our main catalogue, available for download in our technical section.

Key Turbo 30, 24volt Sliding Gate Motor

Electromechanical gear motor for sliding gates up to 300 kg, 24 Vdc

With slowdown function in both opening and closing to preserve your gate integrity. Conceived to carry intensive use and harsh working conditions. Electronic and mechanical parts well protected from external agents. Easy maintenance thanks to the horizontal control unit position. With magnetic encoder for detecting obstacles with maximum safety. With fixing plate included.


eXTReMe Tracker

Search Engine Spider Simulator

Enter URL to Spider